Marine Power & Control Cable

LV and MV shipboard power, lighting and control cable to IEC 60092 — XLPE or EPR insulation, up to 26/35 kV, with flame-retardant, fire-resistant and LSZH options.

Technical parameters

Typical range — confirmed per line item at quotation
Application	Fixed installation in power, lighting and control circuits on ships and offshore platforms
Standards	IEC 60092-350, -353, -354, -360; IEC 60228
Voltage classes	0.6/1 kV (LV); 3.6/6 to 18/30 kV (MV); 26/35 kV on request
Insulation	XLPE or EPR; semi-conducting screens on MV
Conductor	Bare or tinned stranded copper, class 2 or class 5
Armour / sheath	Tinned copper braid; SHF1, SHF2, PVC or CR inner sheath
Temperature	90 °C continuous; 250 °C short circuit (5 s)
Bending radius	12 × OD single core; 9 × OD three core
3.6/6 kV	10 – 300 mm² single core · 10 – 240 mm² three core
6/10 kV	16 – 300 mm² · 16 – 240 mm²
8.7/15 kV	25 – 300 mm² · 25 – 240 mm²
12/20 kV	35 – 300 mm² · 35 – 240 mm²
18/30 kV	50 – 300 mm² · 50 – 240 mm²
On request	Flame retardant IEC 60332-1 / 60332-3-24; fire resistant IEC 60331 (mica tape); LSZH IEC 61034 + IEC 60754

Quoted against your requirement, not a catalogue default

Send the detailed requirement — vessel type and size, service conditions, voltage or medium, quantities, and the drawing or specification reference. The build-up, the approval route and the delivery terms are then recommended for that requirement and confirmed with the quotation.